Table of Contents
Advertisement
Configuring a Multipoint Connection
By default, all interfaces are assumed to be point-to-point connections. To configure
an interface to be a multipoint connection, include the
You can include this statement at the following hierarchy levels:
Configuring Accounting for the Logical Interface
Juniper Networks routing platforms can collect various kinds of data about traffic
passing through the routing platform. You can set up one or more accounting profiles
that specify some common characteristics of this data, including the following:
You configure the profiles and define a unique name for each profile using statements
at the
profiles: interface profiles and filter profiles. You configure interface profiles by
including the
You configure filter profiles by including the
accounting-options]
Management Configuration Guide.
You apply filter profiles by including the
filter filter-name]
more information, see the JUNOS Policy Framework Configuration Guide.
Applying an Accounting Profile to the Logical Interface
To enable accounting on a logical interface, include the
You can include this statement at the following hierarchy levels:
You can also reference profiles for the physical interface; for more information, see
"Configuring Accounting for the Physical Interface" on page 142.
multipoint;
[edit interfaces interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces interface-name unit
logical-unit-number]
The fields used in the accounting records
The number of files that the router retains before discarding, and the number
of bytes per file
The period that the system uses to record the data
[edit accounting-options]
interface-profile
hierarchy level. For more information, see the JUNOS Network
and
[edit firewall family family filter filter-name]
accounting-profile name;
[edit interfaces interface-name unit logical-unit-number]
Chapter 4: Configuring Logical Interface Properties
hierarchy level. There are two types of accounting
statement at the
[edit accounting-options]
filter-profile
accounting-profile
Configuring a Multipoint Connection
multipoint
statement:
hierarchy level.
statement at the
[edit
statement at the
[edit firewall
hierarchy levels. For
statement:
accounting-profile
169
Advertisement
Table of Contents
