• Weight (Cardiac exam) The patient weight in
pounds or kilos. (To change the units, see
"Presets setup" on page 22.)
• BSA (Cardiac exam) Body Surface Area.
Automatically calculated after you enter
height and weight.
• Ethnicity (IMT exam) Ethnic origin
• Reading Dr.
• Referring Dr.
• Institution
Images and clips
Saving images and clips
When you save an image or clip, it saves to
internal storage. The system beeps afterward if
Beep Alert is on, and the percentage icon flashes.
(See "Audio, Battery setup" on page 19.) The
percentage icon in the system status area shows
the percentage of space used in internal storage.
If you try to save an image or clip when no space
remains, the system alerts you that internal storage
is full. To resolve this issue, archive images and clips
that you wish to keep, and then delete them from
the system to free up space. To receive alerts when
storage is near capacity, see "To receive storage
alerts" on page 20.
To access saved images and clips, open the
patient list. See "Reviewing patient exams" on
page 43.
To save an image
Press the
key.
SAVE
The image saves to internal storage.
By default, the
key saves only the image. As
SAVE
a shortcut during calculations, the
save both the image to internal storage and the
calculation to the patient report. See "Presets
setup" on page 22.
42
Images and clips
To capture and save a clip
Clips, an optional feature, lets you capture,
preview, and save clips.
1 Set Clips options. (See "To set Clips options"
2 Press the
To set Clips options
Setting Clips options ensures that clips are
captured to your specifications.
1 In 2D imaging mode, select Clips on‐screen.
2 Set options as desired.
key can
SAVE
on page 42.)
key.
CLIP
One of the following occurs:
• If Prev/Off is selected, the clip saves
directly to internal storage.
• If Prev/On is selected, the clip plays back
in preview mode. You can select any of the
following on‐screen:
• A playback speed
• Pause to interrupt playback
• Left: x or Right: x to remove frames
from the left or right sides of the clip
(where x is the beginning or ending
frame number)
• Save to save the clip to internal storage
• Delete to delete the clip
(1x, 1/2x, 1/4x)