Optical Disk Access Led; Disk Led 1, 2 - NEC Express5800/T110i-S User Manual

Chapter 1 General Description
4.5.5

Optical Disk Access LED

The LED lights/flashes when the media set on the optical disk drive is being accessed.
4.5.6

DISK LED 1, 2

When 2.5-inch HDD cage is installed, each drive has its respective LED (DISK LED).
DISK1 LED 1,2 pattern
DISK LED 1
On/blinking (green)
Off
Blinking (green)
Off
DISK LED 1 (green)
Configuration
DISK LED 2
Off 2.5-inch HDD cage
installed
On (amber) 2.5-inch HDD cage
installed
(RAID constitution)
Blinking (amber) 2.5-inch HDD cage
installed
(RAID constitution)
Off 2.5-inch HDD cage
installed
Important
Observe the following precautions whenever you use the auto rebuilding
feature.
 Do not turn off or reboot the server while a HDD is being rebuilt.
 Wait at least 90 seconds before installing a HDD after removing one.
 Do not replace a HDD while another HDD is being rebuilt.
Express5800/T110i-S User's Guide
DISK LED 2 (amber)
Description
Hard disk drive is being
accessed.
Hard disk drive is failing.
Rebuilding is in progress.
Hard disk drive is halted.
4. Names and Functions of Parts
Action
－
Contact your sales
representative.
－
－
29