Table of Contents
Advertisement
Chapter 2 Preparations
1.22
Status LED Panel (Systems Insight Display) kit N8117-07/08
The LED display panel allows easy monitoring of the operating status of the entire system (Status LED Panel).
Using this panel allows for diagnosing.
2.5-inch x8 drive model
2.5-inch x10 drive model
3.5-inch x4 drive model
Installing N8117-07/08 Status LED Panel kit
Please prepare the following before installing the options.
Parts included in the option kit
T-10 hexalobular driver
To install the components, follow these steps.
1.
Back up all data in the server.
2.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3.
Remove the power/UID/USB cable from the front power button/USB 3.0 connector on the motherboard.
Important
The surface becomes hot after use so to avoid burns please allow the drive
and internal parts of the system to cool before touching.
Note
In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
Status LED Panel
Status LED Panel
143
Advertisement
Table of Contents
