Siemens SINAMICS G120 List Manual page 318

2 Parameters
2.2 List of parameters
p2030 Field bus interface protocol selection / Field bus protocol
CU250S_V_CAN Access level: 1
Can be changed: T
Unit group: -
Min
0
Description: Sets the communication protocol for the field bus interface.
Value: 0:
4:
Note: Changes only become effective after POWER ON.
The parameter is not influenced by setting the factory setting.
p2030 Field bus interface protocol selection / Field bus protocol
CU250S_V_DP Access level: 1
Can be changed: T
Unit group: -
Min
0
Description: Sets the communication protocol for the field bus interface.
Value: 0:
3:
Note: Changes only become effective after POWER ON.
The parameter is not influenced by setting the factory setting.
p2030 Field bus interface protocol selection / Field bus protocol
CU250S_V_PN Access level: 1
Can be changed: T
Unit group: -
Min
0
Description: Sets the communication protocol for the field bus interface.
Value: 0:
7:
10:
Note: Changes only become effective after POWER ON.
The parameter is not influenced by setting the factory setting.
p2031 Fieldbus interface MODBUS parity / Modbus parity
CU250S_V Access level: 2
Can be changed: T
Unit group: -
Min
0
Description: Sets the parity for the Modbus protocol (p2030 = 2).
Value: 0:
1:
2:
Note: Fieldbus IF: Fieldbus interface
Changes only become effective after POWER ON.
The parameter is not influenced by setting the factory setting.
The parameter is set to the factory setting when the protocol is reselected (p2030 = 2).
318
No protocol
CAN
No protocol
PROFIBUS
No protocol
PROFINET
EtherNet/IP
No parity
Odd parity
Even parity
Calculated: -
Scaling: -
Unit selection: -
Max
4
Calculated: -
Scaling: -
Unit selection: -
Max
3
Calculated: -
Scaling: -
Unit selection: -
Max
10
Calculated: -
Scaling: -
Unit selection: -
Max
2
Data type: Integer16
Dyn. index: -
Func. diagram: 9310
Factory setting
4
Data type: Integer16
Dyn. index: -
Func. diagram: 9310
Factory setting
3
Data type: Integer16
Dyn. index: -
Func. diagram: 9310
Factory setting
7
Data type: Integer16
Dyn. index: -
Func. diagram: 9310
Factory setting
2
SINAMICS G120 CU250S-2 Control Units
List Manual, 09/2017, A5E33842890