Siemens SINAMICS G120 List Manual page 801

Cu250s-2 control units

Hide thumbs Also See for SINAMICS G120:

Internal control/status words

Function diagrams

2501 – Control word, sequence control (r0898)

2503 – Status word, sequence control (r0899)

2505 – Control word, setpoint channel (r1198)

2510 – Status word 1 (r0052)

2511 – Status word 2 (r0053)

2512 – Control word 1 (r0054)

2513 – Supplementary control word (r0055)

2520 – Control word, speed controller (r1406)

2522 – Status word, speed controller (r1407)

2526 – Status word, closed-loop control (r0056)

2530 – Status word, current control (r1408)

2534 – Status word, monitoring functions 1 (r2197)

2536 – Status word, monitoring functions 2 (r2198)

2537 – Status word, monitoring functions 3 (r2199)

2546 – Control word, faults/alarms (r2138)

2548 – Status word, faults/alarms 1 and 2 (r2139 and r2135)

2610 – Sequence control - Sequencer

2634 – Sequence control - missing enable signals, line contactor control

SINAMICS G120 CU250S-2 Control Units

List Manual, 09/2017, A5E33842890

3 Function diagrams

3.8 Internal control/status words

Show Quick Links