Siemens SINAMICS G120 List Manual page 108

2 Parameters
2.2 List of parameters
07
13
14
15
Notice: Information on Gn_STW/Gn_ZSW should be taken from the corresponding product documentation.
Note: The signal source for the encoder control word is set with p0480.
p0488[0...2] Measuring probe 1 input terminal / Meas probe 1 inp
Access level: 3
Can be changed: U, T
Unit group: -
Min
0
Description: Sets the input terminal to connect probe 1.
Value: 0:
24:
25:
26:
27:
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Reserved
Dependency: Refer to: p0489, p0490, p0728
Notice: Regarding the terminal designation:
The first designation is valid for CU320, the second for CU310.
To select the values:
For CX32, NX10 and NX15, only DI/DO 8, 9, 10, 11 can be selected as fast inputs (refer to the Equipment Manual).
Note: DI/DO: Bidirectional Digital Input/Output
The terminal must be set as input (p0728).
Refer to the encoder interface for PROFIdrive.
If parameterization is rejected, check whether the terminal is already being used in p0580, p0680, p2517 or p2518.
p0489[0...2] Measuring probe 2 input terminal / Meas probe 2 inp
Access level: 3
Can be changed: U, T
Unit group: -
Min
0
Description: Sets the input terminal to connect probe 2.
Value: 0:
24:
25:
26:
27:
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Reserved
Dependency: Refer to: p0488, p0490, p0728
Note: DI: Digital Input
108
Flying measurement mode/search for
reference mark
Request absolute value cyclic
Request parking encoder
Request acknowledge encoder fault
No measuring probe
DI/DO 24 (X208-3)
DI/DO 25 (X208-4)
DI/DO 26 (X208-5)
DI/DO 27 (X208-6)
No measuring probe
DI/DO 24 (X208-3)
DI/DO 25 (X208-4)
DI/DO 26 (X208-5)
DI/DO 27 (X208-6)
Flying measurement
Yes
Yes
Yes
Calculated: -
Scaling: -
Unit selection: -
Max
27
Calculated: -
Scaling: -
Unit selection: -
Max
27
Reference marks
No
No
No
Data type: Integer16
Dyn. index: -
Func. diagram: 4740
Factory setting
0
Data type: Integer16
Dyn. index: -
Func. diagram: -
Factory setting
0
SINAMICS G120 CU250S-2 Control Units
List Manual, 09/2017, A5E33842890
-
-
-
-