Siemens SINAMICS G120 Compact Operating Instructions

Warnung
Lebensgefahr durch Berührung unter Spannung stehende Teile
Das vorliegende Gerät führt gefährliche Spannungen.
Beim Berühren unter Spannung stehender Teile erleiden Sie Tod oder schwere
Körperverletzungen.
Beachten Sie die Hinweise in den Handbüchern des zugehörigen Umrichters.
Attention
Danger de mort en cas de contact avec des pièces sous tension
L'appareil présente des tensions électriques dangereuses.
Tout contact avec des parties sous tension peut entraîner la mort ou des blessures
graves.
Respecter les consignes figurant dans les manuels du variateur concerné.
Drill patterns and dimensions PM240-2, Push-through
Cutouts and drill patterns in
Mounting frame
the cabinet wall for the
fixing hole
mounting frame
b
Mounting frame
Ø 6 mm
fixing hole
b
IP20 Units
Ø 6 mm
Frame Dimensions (mm) FSC Distances
size (mm)
1)
Height Width Depth
Max.
With depth
S hielding with C U
P late and OP Above B elow S crew
c
FSA 196 276 73 165 250 80
FSB 291 370 100 165 250 80
c
FSC 355 432 140 165 250 80
The Power M odules can be mounted side-by-side. Due to tolerance reasons, we recommend a lateral
1)
Mounting frame Mounting frame
distance of about 1 mm fixing hole fixing hole
P T Units
Frame
Dimensions (mm)
size
Height Max.
Width Depth
depth
without with
shield shield with CU
T1 T2 and OP
plate plate
FSA 238 322 126 171 118 53 256
118 53
FSB 345 430 154 171 256
FSC 411 500 200 171 118 53 256
1) The Power Modules can be mounted side-by-side. Due to tolerance reasons, we recommend a lateral distance of about 1 mm.
C able lengths, using EM I Level (E mission)
Scr eened cables, filtered units (class A) 50 m Sec ond Environment, C2
1)
Scr eened cables, unfiltered units, 50 m EMI St andard not fullfilled
A5E37968360 AC
Unscree ned cables, filtered or unfiltered units 100 m EMI St andard not fullfilled
*A5E37968360*
Compact Operating Instructions
Danger to life when live parts are touched
The present device conducts hazardous voltages.
Touching live components can result in death or severe injury.
Observe the notes in the manuals of the corresponding converter.
Peligro de muerte al tocar piezas bajo tensi
En el presente equipo hay aplicadas tensiones peligrosas.
Tocar piezas que están bajo tensión puede provocar lesiones corporales graves o
incluso la muerte.
Respete las indicaciones que se especifican en los manuales del convertidor
correspondiente.
Push-through mounting frame with
mounting sequence
Fixings Drill pattern
(mm)
Tightening
Torque
(Nm) a b c
100 M4 2.5 186 62.3 6
100 M4 2.5 281 80 6
FSA: 6SL3260-6AA00-0DA0
100 M4 3.0 343 120 6
FSB: 6SL3260-6AB00-0DA0
FSC: 6SL3260-6AC00-0DA0
Air flow dis- Fixings Drill pattern and cutouts
tances (mm) 1) (mm)
Tightening
torque
a b c d
Above Below Screw (NM)
80 100 M5 3.5 103 106 88 198 27
80 100 M5 3.5 147.5 134 116 304 34.5
80 100 M5 3.5 123 174 156 365 30.5
Warning
Advertencia
ón
Mounting Frame
Seal
Cabinet
It's recommended to use the optional mounting
frame to install the push-through Power Module in
a cabinet. This optional mounting frame is designed
in conjunction with the supplied seal to easily
maintain an IP55 rating of the enclosure (the seal is
delivered with the Power Module). If the Power
Module is mounted without using the optional
mounting frame, it is the user's responsibility to
ensure that the correct IP protection rating is
reached.
Air flow distances
e
Power Module PM240-2, FSA, FSB, FSC
警告 警告 警告 警告
接触带电部件会引发生命危险 接触带电部件会引发生命危险 接触带电部件会引发生命危险 接触带电部件会引发生命危险
本设备会传导危险电压。
接触带电部件可能会造成人员重伤，甚至是死亡。
务必遵循变频器手册中的说明。
Avvertenza
Pericolo di morte per contatto con parti sotto tensione
In questo apparecchio sono presenti tensioni pericolose.
Il contatto con parti sotto tensione può provocare la morte o gravi lesioni.
Attenersi alle avvertenze contenute nei manuali del rispettivo convertitore.
Dimension and drill patterns PM240-2, IP20
b
36.5
FSB/FSC
FSA
b
IP20 Units
Frame Dimensions (mm)
size
Height Width Depth
without with
shield shield
plate plate
FSA 196 276 73 165
FSB 292 2 370 100 165
FSC 355 432 140 165
The Power Modules can be mounted side-by-side. Due to tolerance reasons, we recommend a lateral
1)
distance of about 1 mm.
Screening plate fitting PM240-2 PT Screening plate fitting PM240-2
P T Units
Frame Dimensions (mm)
size
Height Width Depth
2 With
2
S hielding
1
P late
FSA 238 322 126 171 117.7 53.1
FSB 345 430 154 171 117.7 53.1
FSC 411 500 200 171 117.7 53.1
1) The Power M odules can be mounted side-by-side. Due to tolerance reasons, we recommend a la teral distance o
M5,
3.5 Nm
Declaration of Conformity:
C able lengths, using
The Declaration of Conformity can be found at the following link:
https://support.industry.siemens.com/cs/ww/en/ps/13225/cert Scr eened cables, filtered units (class A)
Scr eened cables, unfiltered units,
For detailed information, see PM240-2 Hardware Installation Manual:
Unscree ned cables, filtered or unfiltered units
https://support.industry.siemens.com/cs/ww/en/ps/13224/man
SINAMICS G120
Air flow dis- Fixings
Drill pattern
tances (mm) 1)
(mm)
Max.
depth Tightening
with CU torque
Above Below Screw
and OP (NM) a b c
250 80 100 M4 2.5 186 62.3 6
250 80 100 M4 2.5 281 80 6
250 80 100 M5 3.5 343 120 6
Distances Fixings Drill patt
(mm)
1)
Max.
depth Tightening
with C U 3 Torque
2
1
4
T1 T2 and OP Above B elow S crew 3 (Nm) a
256 80 100 M5 3.0 103
256 80 100 M5 3.0 147.5
256 80 100 M5 3.0 123
M4,
2.5 Nm
Siemens AG,
Digital Industries
EM I Level (E mission)
Motion Control
Postfach 3180
50 m Sec ond Environment, C2
91050 ERLANGEN
50 m EMI St andard not fullfilled
Germany
100 m EMI St andard not fullfilled
Edition: 04/2021