Siemens SINAMICS G120 List Manual page 612

2 Parameters
2.2 List of parameters
5:
6:
9999: Do not calculate
p20037 AND 1 run sequence / AND 1 RunSeq
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: T
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
0
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Setting parameter for the run sequence of instance AND 1 within the run-time group set in p20036.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20038[0...3] BI: AND 2 inputs / AND 2 inputs
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: T
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
-
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Sets the signal source of input quantities I0, I1, I2, I3 of instance AND 2 of the AND function block.
Index: [0] = Input I0
[1] = Input I1
[2] = Input I2
[3] = Input I3
r20039 BO: AND 2 output Q / AND 2 output Q
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: -
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
-
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Display parameter for binary quantity Q = I0 & I1 & I2 & I3 of instance AND 2 of the AND function block.
p20040 AND 2 run-time group / AND 2 RTG
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: T
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
1
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Setting parameter for the run-time group in which the instance AND 2 of the AND function block is to be called.
Value: 1:
2:
3:
4:
5:
6:
9999: Do not calculate
612
Run-time group 5
Run-time group 6
Run-time group 1
Run-time group 2
Run-time group 3
Run-time group 4
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Data type: Unsigned16
Dyn. index: -
Func. diagram: 7210
Factory setting
20
Data type: U32 / Binary
Dyn. index: -
Func. diagram: 7210
Factory setting
0
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7210
Factory setting
-
Data type: Integer16
Dyn. index: -
Func. diagram: 7210
Factory setting
9999
SINAMICS G120 CU250S-2 Control Units
List Manual, 09/2017, A5E33842890