Siemens SINAMICS G120 List Manual page 501

r7850[0...n] Drive object operational/not operational / DO ready for oper
Access level: 4
Can be changed: -
Unit group: -
Min
-32786
Description: Displays whether, for an activated drive object, all activated topology components are available or not (or whether
these can be addressed).
0: Drive object not ready for operation
1: Drive object ready for operation
r7901[0...81] Sampling times / t_sample
Access level: 4
Can be changed: -
Unit group: -
Min
- [µs]
Description: Displays the sampling times currently present on the drive unit.
r7901[0...63]: sampling times of hardware time slices.
r7901[64...82]: sampling times of software time slices.
r7901[x] = 0, means the following:
No methods have been registered in the time slice involved.
Note: The basis for the software time slices is T_NRK = p7901[13].
r7903 Hardware sampling times still assignable / HW t_samp free
Access level: 3
Can be changed: -
Unit group: -
Min
-
Description: Displays the number of hardware sampling times that can still be assigned.
These free sampling times can be used by OA applications such as DCC or FBLOCKS.
Note: OA: Open Architecture
r8540.0...15 BO: STW1 from IOP in the manual mode / STW1 IOP
Access level: 3
Can be changed: -
Unit group: -
Min
-
Description: For the manual mode: the STW1 (control word 1) entered from the IOP is displayed.
Bit field: Bit
00
01
02
03
04
05
06
07
08
09
10
SINAMICS G120 CU250S-2 Control Units
List Manual, 09/2017, A5E33842890
Signal name
ON/OFF1
OC / OFF2
OC / OFF3
Reserved
Reserved
Reserved
Reserved
Acknowledge fault
Jog bit 0
Jog bit 1
Reserved
Calculated: -
Scaling: -
Unit selection: -
Max
32767
Calculated: -
Scaling: -
Unit selection: -
Max
- [µs]
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
-
1 signal
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2 Parameters
2.2 List of parameters
Data type: Integer16
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: -
Factory setting
- [µs]
Data type: Unsigned16
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned16
Dyn. index: -
Func. diagram: -
Factory setting
-
0 signal
No
No
No
No
No
No
No
No
No
No
No
FP
-
-
-
-
-
-
-
-
3030
3030
-
501