Siemens SINAMICS G120 List Manual page 642

2 Parameters
2.2 List of parameters
p20157 PCL 1 run sequence / PCL 1 RunSeq
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: T
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
0
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Setting parameter for the run sequence of instance PCL 1 within the run-time group set in p20156.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20158 BI: PDE 0 input pulse I / PDE 0 inp_pulse I
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: T
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
-
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Sets the signal source for the input pulse I of instance PDE 0 of the closing delay device.
p20159 PDE 0 pulse delay time in ms / PDE 0 t_del ms
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: T
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
0.00
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Setting parameter for pulse delay time T in milliseconds of instance PDE 0 of the closing delay device.
r20160 BO: PDE 0 output Q / PDE 0 output Q
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: -
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
-
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Display parameter for output pulse Q of instance PDE 0 of the closing delay device.
642
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
5400000.00
Calculated: -
Scaling: -
Unit selection: -
Max
-
Data type: Unsigned16
Dyn. index: -
Func. diagram: 7230
Factory setting
410
Data type: U32 / Binary
Dyn. index: -
Func. diagram: 7232
Factory setting
0
Data type: FloatingPoint32
Dyn. index: -
Func. diagram: 7232
Factory setting
0.00
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7232
Factory setting
-
SINAMICS G120 CU250S-2 Control Units
List Manual, 09/2017, A5E33842890