Siemens SINAMICS G120 List Manual page 675

r20305 BO: NOT 5 inverted output / NOT 5 inv output
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: -
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
-
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Display parameter for the inverted output of instance NOT 5 of the inverter.
p20306 NOT 5 run-time group / NOT 5 RTG
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: T
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
1
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Setting parameter for the run-time group in which the instance NOT 5 of the inverter is to be called.
Value: 1:
2:
3:
4:
5:
6:
9999: Do not calculate
p20307 NOT 5 run sequence / NOT 5 RunSeq
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: T
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
0
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Setting parameter for the run sequence of instance NOT 5 within the run-time group set in p20306.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
p20308[0...3] CI: ADD 2 inputs / ADD 2 inputs
CU250S_V Access level: 3
(FBLOCKS)
Can be changed: T
CU250S_V_CAN
Unit group: -
(FBLOCKS)
Min
CU250S_V_DP
-
(FBLOCKS)
CU250S_V_PN
(FBLOCKS)
Description: Sets the signal source of input quantities X0, X1, X2, X3 of instance ADD 2 of the adder.
Index: [0] = Input X0
[1] = Input X1
[2] = Input X2
[3] = Input X3
SINAMICS G120 CU250S-2 Control Units
List Manual, 09/2017, A5E33842890
Run-time group 1
Run-time group 2
Run-time group 3
Run-time group 4
Run-time group 5
Run-time group 6
Calculated: -
Scaling: -
Unit selection: -
Max
-
Calculated: -
Scaling: -
Unit selection: -
Max
9999
Calculated: -
Scaling: -
Unit selection: -
Max
32000
Calculated: -
Scaling: PERCENT
Unit selection: -
Max
-
2 Parameters
2.2 List of parameters
Data type: Unsigned32
Dyn. index: -
Func. diagram: 7216
Factory setting
-
Data type: Integer16
Dyn. index: -
Func. diagram: 7216
Factory setting
9999
Data type: Unsigned16
Dyn. index: -
Func. diagram: 7216
Factory setting
780
Data type: U32 / FloatingPoint32
Dyn. index: -
Func. diagram: 7220
Factory setting
0
675