Siemens SINAMICS G120 List Manual page 798

<1> PZD receive word 1
<2> PZD receive word 2
Fieldbus
PZD receive word 3
PZD receive word 4
Receive telegram
PZD receive word 5
PZD receive word 6
PZD receive word 7
PZD receive word 8
PZD receive word 9
PZD receive word 10
PZD receive word 11
PZD receive word 12
<1> The receive word 1 must be used as control word (STW1) (due to bit 10 "control requested").
<2> The preconfiguration with the speed setpoint is set automatically via p1000 = 6.
<3> Using the connector-binector converters, the bits can be extracted from two of the PZD receive words 3 to 8 and used as binectors.
<4> The following representation applies for words: 4000 hex = 100 %.
The reference variables p200x apply for the ongoing interconnection (100 % -> p200x).
The following applies for temperature values: 100 °C -> 100 % = 4000 hex, 0 °C -> 0 %.
1 2
Fieldbus Interface (USS, Modbus)
Receive telegram, free interconnection via BICO (p0922 = 999)
r2050 [0]
r2050 [1]
r2050 [2]
r2050 [3]
PZD recv word
r2050 [4]
PZD recv word
r2050 [5]
PZD recv word
r2050 [6]
PZD recv word
r2050 [7]
PZD recv word
r2050 [8]
PZD recv word
r2050 [9]
PZD recv word
r2050 [10]
PZD recv word
r2050 [11]
<4>
Reference quantities for further
interconnection
p200x
3 4
r2090.0
r2090.15
PZD recv word
r2091.0
r2091.15
PZD recv word
r2092.0
r2092.15
PZD recv word
r2093.0
r2093.15
PZD recv word
2 connector-binector converter
<3>
Con/bin S_src
p2099 [0]
(0)
<3>
Con/bin S_src
p2099 [1]
(0)
5 6
fp_9360_97_52.vsd
05.09.2017 V4.7.9
...
PZD1 recv bitw
PZD1 recv bitw
... PZD2 recv bitw
PZD2 recv bitw
... PZD3 recv bitw
PZD3 recv bitw
...
PZD4 recv bitw
PZD4 recv bitw
Con/bin outp inv
p2098[0].0
0 Con/bin outp
r2094 .0
1
1
Con/bin outp inv
p2098 [0].15
0
Con/bin outp
r2094.15
1
1
Con/bin outp inv
p2098 [1].0
0
Con/bin outp
r2095.0
1
1
Con/bin outp inv
p2098 [1].15
0
Con/bin outp
r2095.15
1
1
7 8
Function diagram
- 9360 -
G120 CU250S-2