S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Context
IPv6 DNS entries cannot be restored after being cleared. So, confirm the action before you use
this command.
Procedure
Step 1 Run the reset dns ipv6 dynamic-host command in the user view to clear dynamic IPv6 DNS
entries statistics in the domain name cache.
----End
10.4.2 Monitoring Network Operation Status of IPv6 DNS
This section describes IPv6 DNS operation monitoring through the display command.
Context
In routine maintenance, you can run the following commands in any view to check the operation
of IPv6 DNS.
Procedure
l
l
l
l
----End
10.5 Configuration Examples
This section provides several configuration examples of IPv6 DNS.
10.5.1 Example for Configuring IPv6 DNS
This section provides a configuration example of IPv6 DNS.
Issue 01 (2012-03-15)
CAUTION
Run:
display dns domain
Domain names are checked.
Run:
display dns server
Configurations of the DNS server are checked.
Run:
display dns ipv6 dynamic-host
Contents about the cache of the IPv6 dynamic domain names are checked.
Run:
display ipv6 host
The static DNS table is checked.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 IPv6 DNS Configuration
177