Sense Resistance Using A Unique Name - Keysight N2820A User Manual

3 Using N2825A Probe Heads
To Manually Identify the R
To Manually Identify the R
On Infiniium
Oscilloscopes
52
Resistance
SENSE
SENSE
If you are using multiple, different DUT-mounted R
resistances, the following procedures show you how to enter the
resistance each time that you use the N2825A head with a new
R .
SENSE
This method is used in
Oscilloscopes"
1 Click the Setup > Probe Configuration menu command to view the
Probe Configuration dialog box, shown in
Figure 22 Infiniium Dialog Box With N2825A Heads
2 Click the tab that represents the probe. In the case of N2820A
probes, the probe's primary channel.
Resistance
"Step 5. Configuring the Probe on Infiniium
on page 27 and is repeated here.
SENSE
Figure 22.
N2820/1A User's Guide