Deleting Customers; Modifying Sdps; Deleting Sdps - Alcatel-Lucent 7750 SR OS Service Manual

Service Management Tasks

Deleting Customers

The no form of the
All service references to the customer must be shut down and deleted before a customer account
can be deleted.
CLI Syntax: config>service# no customer customer-id
Example

Modifying SDPs

To access a specific SDP, you must specify the SDP ID. To display a list of SDPs, use the
service sdp
then enter the new information.
NOTE: Once created, you cannot modify the SDP encapsulation type.
CLI Syntax: config>service# sdp sdp-id
Example

Deleting SDPs

The no form of the
SDP can be deleted, the SDP must be shutdown and removed (unbound) from all customer
services where it is applied.
CLI Syntax: config>service# no sdp 79
Example
Page 72
command removes a customer ID and all associated information.
customer
:
config>service# epipe 5 customer 27 shutdown
config>service# epipe 9 customer 27 shutdown
config>service# no epipe 5
config>service# no epipe 9
config>service# no customer 27
command. Enter the parameter, such as
:
config>service# sdp 79
config>service>sdp# description "Path-to-107"
config>service>sdp# shutdown
config>service>sdp# far-end "10.10.10.107"
config>service>sdp# path-mtu 1503
config>service>sdp# no shutdown
command removes an SDP ID and all associated information. Before an
sdp
:
config>service# epipe 5 spoke-sdp 79:5
config>service>epipe>sdp# shutdown
config>service>epipe>sdp# exit
,
description far-end
7750 SR OS Services Guide
show
, and , and
lsp