Common Configuration Tasks; Configuring An Event Log - Alcatel-Lucent 7210 SAS E OS System Management Manual

Common Configuration Tasks

Common Configuration Tasks
The following sections are basic system tasks that must be performed.
•
•
•
•
•
•
•

Configuring an Event Log

A event log file contains information used to direct events, alarms, traps, and debug information to
their respective destinations. One or more event sources can be specified. File IDs, SNMP trap
groups, or syslog IDs must be configured before they can be applied to an event log ID.
Use the following CLI syntax to configure a log file:
CLI Syntax: config>log
Page 222
Configuring a File ID on page 224
Configuring an Event Log on page 222
Configuring an Accounting Policy on page 225
Configuring Event Control on page 226
Configuring a Log Filter on page 228
Configuring an SNMP Trap Group on page 229
Configuring a Syslog Target on page 230
log-id log-id
description description-string
filter filter-id
from {[main] [security] [change] [debug-trace]}
to console
to file file-id
to memory [size]
to session
to snmp [size]
to syslog syslog-id}
time-format {local|utc}
no shutdown
7210 SAS-E OS System Management Guide