Creating An Epipe Service - Alcatel-Lucent 7705 Service Manual

The following example displays the Cpipe spoke SDP configuration output for PE Router 1
(ALU-41).
A:ALU-41>config>service# info
-------------------------------------
...
...
-------------------------------------
A:ALU-41>config>service#

Creating an Epipe Service

Use the following CLI syntax to create an Epipe service.
CLI Syntax: config>service# epipe service-id [customer customer-id]
[create] [vpn vpn-id] [vc-switching]
Example:
The following example displays the Epipe service creation output.
ALU-1>config>service# info
-------------------------------------------
-------------------------------------------
7705 SAR OS Services Guide
cpipe 5 customer 1 create
description "cpipe test"
service-mtu 1400
sap 1/1/1.1 create
ingress
qos 102
exit
egress
qos 103
exit
exit
spoke-sdp 1:5 create
exit
no shutdown
exit
description description-string
no shutdown
config>service# epipe 500 customer 5 create
config>service>epipe$ description "Local epipe service"
config>service>epipe# no shutdown
epipe 500 customer 5 vpn 500 create
description "Local epipe service"
no shutdown
exit
VLL Services
Page 207