NEC Univerge sv8500 Manual page 63

Hide thumbs Also See for Univerge sv8500:

Table of Contents

(2) Click "Services" tab to see services that are installed on the PC. When "Microsoft DHCP Server" is listed

as follows, this procedure is not required. Close the Network Dialog Box, and move on to "2. DHCP Server

Setup." When it is not listed, move on to STEP 3.

STEP 3: Click "Add" button.

STEP 4: "Select Network Service" dialog box appears with the following Network Service listing.

Select "Microsoft DHCP Server" and click OK.

STEP 5: A dialog box appears to transfer necessary files for the server, indicating insertion of Microsoft Win-

dows NT CD-ROM and input of file path information. Insert Microsoft Windows NT Server CD-

ROM to the drive, and input the file path for the CD-ROM. When "E drive" is used as a CD-ROM

drive for example, input the data as follows:

STEP 6: Install Service Pack 4 or higher using the CD-ROM. If "Service Pack 4 or higher" has been already

installed on the PC, install the Service Pack again after installing Microsoft DHCP server.

DEVICES REQUIRED TO BUILD NETWORK

Show Quick Links

Table of Contents