NEC Univerge sv8500 Manual page 69

1.1.3 Setting up DHCP Options - Default Gateway (Microsoft Windows NT)
Note: This data assignment is optional.
STEP 1: Adding Options
(1) Select the activated scope (highlighted in blue) in the "DHCP Servers" list box.
(2) Select "DHCP Options" -> "Scope" (or "Global") on the menu bar. As an example, "Scope" is selected in
this case.
(3) "DHCP Options: Scope" dialog box appears. Select "003 Router" from "Unused Options" list box.
(4) Move "003 Router" to "Active Options" by pressing "Add->" button.
STEP 2: Address Entry
(1) Click "Value >>>" button on the "DHCP Options: Scope" dialog box. Then the display changes as follows.
(2) Click "Edit Array..." button.
CHAPTER 1 DEVICES REQUIRED TO BUILD NETWORK
VOL.1-9