Devices Required To Build Network; Dhcp Server - NEC Univerge sv8500 Manual

CHAPTER 1

DEVICES REQUIRED TO BUILD NETWORK

1. DHCP Server

This section explains Dynamic Host Configuration Protocol (DHCP) Server Installation, Setup and the Optional
Setting Procedure. By installing a DHCP server, IP addresses listed below can be automatically set to IP Termi-
nals on the LAN.
When DHCP clients on the other LAN also need to be served by the DHCP server, DHCP Relay Agent must
Note:
be configured on each segment.
• IP Address, Default Gateway, Subnet Mask of the IP terminals
• IP Address of Telephony Server assigned by ADTM
• DNS Server IP Address
The following topics are covered in this section.
1. Microsoft DHCP Server Installation
2. DHCP Server Setup
3. Data Assignment of DHCP Options - Default Gateway
4. Data Assignment of DHCP Options - DRS Address
This section is divided into two parts, for the system using Microsoft Windows NT and for the system using
Microsoft Windows 2000. Select the page necessary for you by clicking on the hyper-link.
• When using Microsoft Windows NT
• When using Microsoft Windows 2000
CHAPTER 1
Items
VOL.1-1
DEVICES REQUIRED TO BUILD NETWORK
Notes
Required if it has not been installed on the PC
Required
Optional: Required when notifying the IP
address of the Default Gateway to IP terminals
Optional: Required when you want DHCP
server to send DRS IP Address to IP terminals.