Echo Canceler Control by Location ID
Echo is voice signal reflection to the calling party.Typical network-related echo is caused by poor impedance
matching. Echo Canceler serves to alleviate this echo. In the system, Echo Canceler can be set to ON/OFF on a
Location ID basis that is given to each network location.
PAD/EC Control IP/PHC Support
By assigning system data (ASYDL, SYS1, Index 825), default PAD/EC value that is appropriate to the network
environment is automatically applied. If the value is not appropriate for a particular network or terminal, it can
be adjusted to match the environment.
5.4
Descriptions of UMG
Information on SV8500-UMG (Ultra Module Group) described in this manual is intended only for North
America market.
INT-29
INTRODUCTION