SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 90

25. Remove the camshaft bearing cap bolts so that the
tightening force can be relieved evenly.
• Intake: #1, #3, #6
• Exhaust: #7, #9, #12
* However, there is no specific removal sequence.
• Intake: #2, #4, #5
• Exhaust: #8, #10, #11
* Do not remove the bolts at a time completely. Remove
them step by step evenly or camshaft can be seriously
damaged.
Installation Notice
Tightening torque
26. Remove the intake and exhaust camshafts from the
cylinder head.
27. Remove the finger follower and the HLA device.
Notice
• Avoid contact with hot metal parts when removing
the HLA device immediately after stopping the
engine.
• Be careful not to be contaminated by foreign
materials.
• To prevent the oil leaks, store the removed finger
follower and HLA device with standing up.
• If the HLA can be easily pressed in by hand, it
indicates the oil inside of HLA has been flown out.
In this case, replace it with new one.
ENGINE ASSEMBLY
DI ENG SM - 2004.4
25 ± 2.5 Nm
DI01-55
Exhaust
Intake
Y220_01115
Y220_01116
Y220_01117
Y220_01118
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN