Shock Absorber Assembly - SSANGYONG Y200 Manual

2C-12 FRONT SUSPENSION
2. Install the bra link between the stabilizer bar and
the lower arm and tighten the mounting nut as the
specified torque.
Installation Notice
Tightening
YAD2C130
3. Install the front stabilizer bar and the skid plate.
Installation Notice
Tightening Torque
YAD2C140

SHOCK ABSORBER ASSEMBLY

Removal Procedure
1. Remove three upper nuts from the shock absorber
assembly.
YAD2C150
2. Remove the yoke mounting pin nut at the lower
arm and the yoke mounting pin.
YAD2C160
(1) 110 - 120 N•m
Torque
(2) 110 - 130 N•m
35 N•m (26 lb-ft)
SSANGYONG Y200