Tensioning Device Shock Absorber - SSANGYONG 1999 Musso Service Manual

TENSIONING DEVICE SHOCK ABSORBER

1 End Cover
2 Nut ................................................. 40.5-49.5 Nm
3 Tensioning Pulley
4 Bolt (M8 X 25) + Washer ................ 22.5-27.5 Nm
Removal & Installation Procedure
1. Remove the end cover (1).
2. Remove the nut (2) and remove the tensioning pulley (3).
Installation Notice
Tightening Torque
3. Unscrew the bolts (4,6) and remove the shock absorber
(7).
Installation Notice
Tightening Torque
5 Tensioning Device
6 Bolt (M8 X 35) + Washer ................ 22.5-27.5 Nm
7 Shock Absorber
40.5 - 49.5 Nm
22.5-27.5 Nm
M161 ENGINE MECHANICAL 1B2-31