REMOVAL AND INSTALLATION
Front Seat
1. Remove three seat rail plastic caps.
2. Remove the seat rail mounting bolts from both sides.
Installation Notice
Tightening torque
3. Disconnect the floor wiring connectors and remove the
front seat.
• Connector locations
Driver side: basic 2, SAB 3
Passenger side: basic 1, SAB 2
4. Install in the reverse order of removal.
VEHICLE INTERIOR
REXTON SM - 2004.4
35 ~ 55 Nm
11B-9
Y220_11B009
Y220_11B010
Y220_11B011
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN