Renault Laguna III Manual page 2617

Condenser - expansion valve connecting pipe: Removal - Refitting
V4Y or V9X, and AIR CONDITIONING 01 or AIR CONDITIONING 02
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the bolt (2) from the « condenser - expan-
sion valve » connecting pipe bracket on the expan-
sion valve.
WARNING
In order to avoid any refrigerant leaks, do not
damage (deform, twist, etc.) the pipe.
a Disconnect the « condenser - expansion valve »
connecting pipe from the expansion valve.
a Remove the seals from the « condenser - expansion
valve » connecting pipe.
a Insert the blanking plugs.
AIR CONDITIONING
123633
62A-61
a Unclip the « condenser - expansion valve » connect-
ing pipe at (3) .
a Remove the « condenser - expansion valve » con-
necting pipe.
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: refrigerant pipe seal
(30,02,02,52).
WARNING
To prevent moisture from entering the system,
place plugs on the cold loop components which
are open to the air.
WARNING
To avoid any leaks, check that the pipe surface is
sound before positioning the new seal. The sur-
face must be clean and scratch free.
a Remove the blanking plugs.
a Oil the seals using air conditioning oil to make fitting
easier (see 62A, Air conditioning, Air condition-
ing: Parts and consumables for the repair, page
62A-2) .
a Fit new seals on the refrigerant connecting pipes.
62A
123634