Rep 12.3 Duplex Cover; Rep 12.4 Duplex Pwb - Xerox DocuPrint N2125 Service Manual

REP 12.3 Duplex Cover

Parts List on PL 13.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly (REP
2. Turn the Duplex Assembly upside down.
3. Release the three locking tabs that secure the cover
4. Remove the Duplex Cover (Figure
Figure 1 Duplex Cover
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 12.3, REP 12.4
WARNING
12.1).
(Figure 1).
1).

REP 12.4 Duplex PWB

Parts List on PL 13.2
Removal
These components are susceptible to electostatic discharge. Observe all ESD procedures to
avoid damage.
Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Assembly
2. Remove the Duplex Cover (REP
3. Carefully release the locking tab and remove the PWB to access the connectors
1).
4. Disconnect P/J392, P/J37, P/J38 and P/J39
5. Remove the Duplex PWB (Figure
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-94
CAUTION
WARNING
(REP 12.1).
12.3).
(Figure 1).
1).
Figure 1 Duplex PWB
(Figure
Initial Issue
DocuPrint N2125