Fig 3-11 Duplex Board And Bracket - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 3-5 Duplex Board and Bracket (PL 14.2)

Fig 3-11 Duplex Board and Bracket

Removal
1.
Power the printer off and disconnect the power cord.
Remove the Duplex Cover (RRP 3-2). Wear an electrostatic wrist
Caution
strap and use caution when working with the Duplex Board.
Static electricity can damage the sensitive electronics of the
Board.
Handle the Duplex Board by the edges of the Board. Never touch
Caution
any of the ICs that are mounted on the Board.
2.
Disconnect the six P/Js that are connected to the Duplex Board.
3.
Remove the four screws securing the Duplex Board to the Duplex Board
Bracket, and remove the Board.
4.
Remove the two screws securing the Bracket to the frame, and remove the
Bracket.
Replacement
1.
Reinstall the Board Bracket onto the frame, and use two screws to secure it.
2.
Reinstall the Duplex Board onto the Board Bracket.
Position the Board so P223 is near the Duplex Motor.
3.
Use four screws to secure the Board to the Bracket.
4.
Reconnect the six P/Js to the Duplex Board.
Reinstall the Duplex Cover (RRP 3-2).
5.
3-530 DocuPrint N4525 Network Laser Printer - Service Guide
Duplex Unit Board
S4525-256