Figure 3 Remove the Stack Full Sensor
4 Repairs and Adjustments
REP 10.7, REP 10.8
REP 10.8 Fuser Drive Assembly
Parts List on
PL 4.10 Item 4
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Duplex Unit,
REP
2.
Remove the IP Board Cover,
3.
Remove the Right Cover,
REP
4.
Remove the Rear Door,
REP
5.
Remove the Fuser,
REP
10.10.
6.
Remove the IP Board Cage,
7.
Remove the Main Drive Assembly,
8.
Disconnect CN9, CN12, CN13, CN16 from the MCU Board and CN37 from the developer
motor. Release the harnesses from the upper clamps,
Figure 1 Remove the MCU Board bracket screws
04/2016
4-94
WARNING
10.1.
REP
28.1.
28.2.
28.6.
REP
3.5.
REP
4.1.
Figure
1.
Phaser 4600/4620/4622 Printer Service Manual
Revised