Rep 7.1 Laser Assembly - Xerox DocuPrint N2025 Service Manual

REP 7.1 Laser Assembly

Parts List on PL 8.1
Removal
These components are susceptible to electrostatic discharge. Observe all ESD procedures to
avoid damage.
Switch off the power and disconnect the Power Cord.
1. Open the Rear Cover.
2. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it from
light.
3. Remove the Left Side Cover (REP 1.1).
4. Remove the Top Cover Assembly (REP 1.3).
5. Remove the screw that secures the Right Side Cover to the Laser Cover (Figure 1).
6. Remove the Front Cover (REP 1.4).
7. Remove the six screws that secure the Laser Cover to the printer (Figure 1). Move the top
of the right cover to the right and remove the Laser Cover.
8. Disconnect P/J112 and the in-line connector P/J114 from the Laser Assembly (Figure 2).
9. Remove the four screws that secure the Laser Assembly to the printer (Figure 2).
10. Remove the Laser Assembly.
Figure 1 Laser Cover
Initial Issue
DocuPrint N2025/N2825
CAUTION
WARNING
Replacement
1. Reinstall the components in the reverse order.
02/2000
4-37
Figure 2 Laser Assembly
Repair-Adjustment
REP 7.1