REP 1.18 Tray 1 (MPT) Pick Roller Assembly
Parts List on
PL 1.1 Item 18
Removal
1.
Remove Tray 1
(REP
1.1).
2.
Remove the 2 KL Clips on the left and right sides.
3.
Remove the Gear.
Figure 1 Removing the KL Clips and Gear
Repairs and Adjustments
REP 1.18
4.
Lift the black Stopper and push towards the left side as shown in
5.
Remove the 2 bearings on the left and right sides.
6.
Slide the cover towards one side to remove it from the shaft.
Figure 3 Removing the Bearings and Cover
October 2012
4-16
Figure
Figure 2 Releasing the Stopper
Revised, 3rd Revision - Xerox Internal Use Only
ColorQube 8570/8870 Service Manual
2.