Stack Configuration Example - H3C S3100-52P Operation Manual

Operation Manual – Stack-Cluster
H3C S3100-52P Ethernet Switch
Table 1-4 Display and maintain stack configurations
Operation
Display the stack
status information
on the main switch
Display the stack
status information
on a slave switch

1.5 Stack Configuration Example

I. Network requirements
Connect Switch A, Switch B and Switch C with each other through their stack ports to
form a stack, in which Switch A acts as the main switch, while Switch B and C act as
slave switches.
Configure Switch B and Switch C through Switch A.
Command
Optional
The display command can be executed
in any view.
When being executed with the members
keyword not specified, this command
displays the main switch and the number
display stacking
of switches in the stack.
[ members ]
When being executed with the members
keyword specified, this command
displays the member information of the
stack, including stack number , device
name, MAC addresses and status of the
main switch/slave switches.
Optional
The display command can be executed
in any view.
The displayed information indicates that
display stacking
the local switch is a slave switch. The
information such as stack number of the
local switch, and the MAC address of the
main switch in the stack is also
displayed.
1-5
Chapter 1 Stack
Description