Configuration Procedure; Prerequisites - H3C S5500-HI Series Fundamentals Configuration Manual

Figure 51 Network diagram
IRF
SwitchD
1: GE1/0/1
2: GE1/0/2
3: GE1/0/3
SwitchA
Users

Configuration procedure

Prerequisites

Configuring link aggregation
Configure the IRF fabric
1.
# Create three dynamic aggregation groups 1, 2, and 3.
<IRF> system-view
[IRF] interface bridge-aggregation 1
[IRF-Bridge-Aggregation1] link-aggregation mode dynamic
[IRF-Bridge-Aggregation1] quit
[IRF] interface bridge-aggregation 2
[IRF-Bridge-Aggregation2] link-aggregation mode dynamic
[IRF-Bridge-Aggregation2] quit
[IRF] interface bridge-aggregation 3
[IRF-Bridge-Aggregation3] link-aggregation mode dynamic
[IRF-Bridge-Aggregation3] quit
# Add ports GigabitEthernet 1/0/1, GigabitEthernet 2/0/1, and GigabitEthernet 3/0/1 that connect
to Switch A to aggregation group 1.
[IRF] interface GigabitEthernet 1/0/1
Core
SwitchE
4
2 3
1
2
1
1
3
1: GE1/0/1
2: GE1/0/2
3: GE1/0/3
SwitchB
Users
Aggregation Group 1
Aggregation Group 2
Aggregation Group 3
4: GE2/0/1
5: GE2/0/2
6: GE2/0/3
6
5
7
8
9
2
2
3
1
3
1: GE1/0/1
2: GE1/0/2
3: GE1/0/3
SwitchC
Users
138
SwitchF
7: GE3/0/1
8: GE3/0/2
9: GE3/0/3
1: GE1/0/1
2: GE1/0/2
3: GE1/0/3