Displaying And Maintaining Traffic Mirroring; Traffic Mirroring Configuration Examples - H3C S5500-EI series Operation Manual

Operation Manual – QoS
H3C S5500-EI Series Ethernet Switches
Enter system view
Enter traffic behavior view
Configure traffic mirroring
action in the traffic
behavior

7.3 Displaying and Maintaining Traffic Mirroring

Display the configuration
information about the
user-defined traffic
behavior
Display the configuration
information about the
user-defined policy

7.4 Traffic Mirroring Configuration Examples

7.4.1 Network Requirements
The user's network is as described below:
Host A (with the IP address 192.168.0.1) and Host B are connected to
GigabitEthernet1/0/1 of the switch.
The data monitoring device is connected to GigabitEthernet1/0/2 of the switch.
It is required to monitor and analyze packets sent by Host A on the data monitoring
device.
Host A
192.168.0.1
Host B
Figure 7-1 Network diagram for configuring traffic mirroring to a port
To do...
system-view
traffic behavior
behavior-name
mirror-to { cpu |
interface interface-type
interface-number }
To do...
display traffic behavior
user-defined
behavior-name
display qos policy
user-defined
policy-name
GE1/0/1
Switch
Chapter 7 Traffic Mirroring Configuration
Use the command...
Use the command...
GE1/0/2
Data monitoring
device
7-2
Remarks
—
Required
Required
Remarks
Available in any view