Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.17.2 Configuration Commands

5.17.2.1 ip dhcp snooping
This command enables the DHCP Snooping globally.
Syntax
ip dhcp snooping
no ip dhcp snooping
no - This command disables the DHCP Snooping globally.
Default Setting
Disabled
Command Mode
Global Config
5.17.2.2 ip dhcp snooping vlan
This command enables the DHCP Snooping on a list of comma-separated VLAN ranges.
Syntax
ip dhcp snooping vlan <vlan-list>
no ip dhcp snooping vlan <vlan-list>
<vlan-list> - Specifies VLAN ID in a list. The range of VLAN ID is 1 to 4093.
no - This command disables the DHCP Snooping on VLANs.
Default Setting
Disabled
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 508