Quanta Computer QuantaMesh User Manual page 953

UANTA COMPUTER INC.
8.4.2.11 ipv6 router ospf
Use this command to enter Router OSPFv3 Config mode.
Syntax
ipv6 router ospf
Default Setting
None
Command Mode
Global Config
8.4.2.12 area default-cost
This command configures the monetary default cost for the stub area. The operator must specify the
area id and an integer value between 1-16777215.
Syntax
area <areaid> default-cost <1-16777215>
<areaid> - Area ID.
Default Setting
None
Command Mode
Router OSPFv3 Config
Layer 2/3/4 Managed Switch
QuantaMesh | IPv6 Commands 953