Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

6.3.2 Configuration Commands

6.3.2.1 router ospf
Use this command to enter Router OSPF mode
Syntax
router ospf
Default Setting
None
Command Mode
Global Config
6.3.2.2 enable
Use enable command resets the default administrative mode of OSPF in the router (active). no enable
command sets the administrative mode of OSPF in the router to inactive
Syntax
enable
no enable
Default Setting
Enabled
Command Mode
Router OSPF Config Mode
.
QuantaMesh | Routing Commands
Layer 2/3/4 Managed Switch
695