Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.5.2 Configuration Commands

5.5.2.1 logging buffered
This command enables logging to in-memory log where up to 128 logs are kept.
Syntax
logging buffered
no logging buffered
no - This command disables logging to in-memory log.
Default Setting
None
Command Mode
Global Config
This command enables wrapping of in-memory logging when full capacity reached. Otherwise when full
capacity is reached, logging stops.
Syntax
logging buffered wrap
no logging buffered wrap
no - This command disables wrapping of in-memory logging when full capacity reached.
Default Setting
None
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 304