Quanta Computer QuantaMesh User Manual page 122

UANTA COMPUTER INC.
5.2.6.12 set igmp mcrtrexpiretime
The user can go to the CLI Interface VLAN Configuration Mode to set the Multicast Router Present
Expiration time on a particular VLAN, use the set igmp mcrtrexpiretime <vlan-id> <0-3600> vlan
configuration command. Use the no set igmp mcrtrexpiretime <vlan-id> to return to default value 0.
Syntax
set igmp mcrtrexpiretime <vlan-id> <0-3600>
no set igmp mcrtrexpiretime <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
<0-3600> - The range of the Multicat Router Present Expire time is 0 to 3600 seconds
Default Setting
0
Command Mode
VLAN database
5.2.6.13 set igmp report-suppression
The user can go to the CLI VLAN Configuration Mode to set IGMP Snooping report-suppression admin
mode on a particular VLAN, use the set igmp report-suppression <vlan-id> vlan configuration
command. Use the no set igmp report-suppression <vlan-id> disable IGMP Snooping
report-suppression admin mode.
Syntax
set igmp report-suppression <vlan-id>
no set igmp report-suppression <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
Default Setting
Disable
Command Mode
VLAN database
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 122