Protected Ports Commands; Show Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.
5.14

Protected Ports Commands

5.14.1 Show Commands

5.14.1.1 show switchport protected
This command displays the status of all the interfaces, including protected and unprotected interfaces.
Syntax
show switchport protected [<0-2>]
Default Setting
None
Command Mode
Privileged Exec
Display Message
Name: An name of the protected port group.
Member Ports: List of ports, which are configured as protected for the group identified with
<groupid>. If no port is configured as protected for this group, this field is blank.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 454