Show Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.19.1 Show Commands

5.19.1.1 show ip arp inspection statistics
This command displays the statistics of the ARP packets processed by Dynamic ARP Inspection. Give
the vlan-list argument and the command displays the statistics on all DAI-enabled VLANs in that list.
Give the single vlan argument and the command displays the statistics on that VLAN. If no argument is
included, the command lists a summary of the forwarded and dropped ARP packets.
Syntax
show ip arp inspection statistics [vlan <vlan-list>]
<vlan-list> - Specifies VLAN ID in a list. The range of VLAN ID is 1 to 4093.
Default Setting
None
Command Mode
Privileged Exec
Display Message
VLAN: The VLAN ID for each displayed row.
Forwarded: The total number of valid ARP packets forwarded in this VLAN.
Dropped: The total number of not valid ARP packets dropped in this VLAN.
DHCP Drops: The number of packets dropped due to DHCP snooping binding database match
failure.
ACL Drops: The number of packets dropped due to ARP ACL rule match failure.
DHCP Permits: The number of packets permitted due to DHCP snooping binding database match.
ACL Permits: The number of packets permitted due to ARP ACL rule match.
Bad Src MAC: The number of packets dropped due to Source MAC validation failure.
Bad Dest MAC: The number of packets dropped due to Destination MAC validation failure.
Invalid IP: The number of packets dropped due to invalid IP checks.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 523