Quanta Computer QuantaMesh User Manual page 133

UANTA COMPUTER INC.
5.2.7.3 ip igmp snooping querier query-interval
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier query interval, use
the ip igmp snooping querier query-interval <1-1800> global configuration command. Use the no ip
igmp snooping querier query-interval return to default value.
Syntax
ip igmp snooping querier query-interval <1-1800>
no ip igmp snooping querier query-interval
<1-1800> - set IGMP snooping querier query interval
Default Setting
60
Command Mode
Global Config
5.2.7.4 ip igmp snooping querier querier-expiry-interval
The user can go to the CLI Global Configuration Mode to set IGMP snooping querier querier expiry
interval, use the ip igmp snooping querier querier-expiry-interval <60-300> global configuration
command. Use the no ip igmp snooping querier query-interval return to default value.
Syntax
ip igmp snooping querier querier-expiry-interval <60-300>
no ip igmp snooping querier querier-expiry-interval
<60-300> - set igmp querier timer expiry
Default Setting
125 seconds
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 133