Virtual Router Redundancy Protocol (Vrrp) Commands; Show Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

6.9 Virtual Router Redundancy Protocol (VRRP) Commands

6.9.1 Show Commands

6.9.1.1 show ip vrrp
This command displays whether VRRP functionality is enabled or disabled. It also displays some global
parameters which are required for monitoring.
Syntax
show ip vrrp
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Admin Mode: Displays the administrative mode for VRRP functionality on the switch.
Router Checksum Errors: Represents the total number of VRRP packets received with an invalid
VRRP checksum value.
Router Version Errors: Represents the total number of VRRP packets received with Unknown or
unsupported version number.
Router VRID Errors: Represents the total number of VRRP packets received with invalid VRID for
this virtual router.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 750