Quanta Computer QuantaMesh User Manual page 689

UANTA COMPUTER INC.
6.3.1.11 show ip ospf range
This command displays information about the area ranges for the specified <areaid>. The <areaid>
identifies the OSPF area whose ranges are being displayed..
Syntax
show ip ospf range <areaid>
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: The area id of the requested OSPF area.
IP Address: An IP address which represents this area range.
Subnet Mask: A valid subnet mask for this area range.
Lsdb Type: The type of link advertisement associated with this area range.
Advertisement: The status of the advertisement. Advertisement has two possible settings: enabled
or disabled.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 689