Quanta Computer QuantaMesh User Manual page 793

UANTA COMPUTER INC.
6.11.1.10 show ip bgp summary
This command displays the status of all Border Gateway Protocol (BGP) connections.
Syntax
show ip ospf neighbor [interface {<slot/port> | vlan <vlan-id>}] [<ip-address>]
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Admin Mode: Shows whether the administrative mode of BGP in the router is enabled or disabled.
BGP Router ID: Router ID for the current BGP.
Local AS Number: Autonomous system number of the current BGP.
Number of Network Entries: Number of unique prefix entries in the BGP database.
Number of AS Paths: Number of path entries in the BGP database.
Neighbor: IP address of the neighbor.
ASN: Autonomous system number of the neighbor.
MsgRcvd: Number of messages received from the neighbor.
MsgSent: Number of messages sent to the neighbor.
State: The area ID of the OSPF area associated with the interface.
Up/Down Time: The length of time that the BGP session has been in the Established state, or the
current status if not in the Established state.
Pfx Rcvd: The number of prefixes that have been received from a neighbor.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 793