Quanta Computer QuantaMesh User Manual page 255

UANTA COMPUTER INC.
5.3.13.4 show sflow samplers
The user can go to the CLI Privilege Exec to get the sFlow sampling instances created on the switch,
use the show sflow samplers Privilege command.
Syntax
show sflow samplers
Default Setting
None
Command Mode
Privilege Exec
Display Message
Sampler Data Source: The sFlowDataSource (slot/port) for this sFlow sampler. This agent will
support Physical ports only.
Receiver Index: The sFlowReceiver configured for this sFlow sampler.
Packet Sampling Rate: The statistical sampling rate for packet sampling from this source.
Max Header Size: The maximum number of bytes that should be copied from a sampled packet to
form a flow sample.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 255