Configuration Commands - Quanta Computer QuantaMesh User Manual

UANTA COMPUTER INC.

5.11.2 Configuration Commands

5.11.2.1 sntp broadcast client poll-interval
This command will set the poll interval for SNTP broadcast clients in seconds as a power of two where
<poll-interval> can be a value from 6 to 10.
Syntax
sntp broadcast client poll-interval <6-10>
no sntp broadcast client poll-interval
<6-10> - The range is 6 to 10.
no - This command will reset the poll interval for SNTP broadcast client back to its default value.
Default Setting
6
Command Mode
Global Config
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 409