Quanta Computer QuantaMesh User Manual page 351

UANTA COMPUTER INC.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Host address - The IP address or hostname of the configured TACACS+ server.
Port: Shows the configured TACACS+ server port number.
Timeout: Shows the timeout in seconds for establishing a TCP connection.
Priority: Shows the preference order in which TACACS+ servers are contacted. If a server
connection fails, the next highest priority server is contacted.
5.9.1.19 show tacacs source-interface
This command is used to display the configured global source interface details used for a RADIUS client.
The IP address of the selected interface is used as source IP for all communications with the server.
Syntax
show tacacs source-interface
Default Setting
None
Command Mode
Privileged Exec
Display Message
TACACS Client Source Interface: The interface to use as the source interface for TACACS client.
TACACS Client Source IPv4 Address: The IP address of the interface configured as the TACACS
client source interface.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands 351