Quanta Computer QuantaMesh User Manual page 651

UANTA COMPUTER INC.
6.1.2.6 arp timeout
This command configures the ARP entry ageout time.
Syntax
arp timeout <15-21600>
no arp timeout
<15-21600> - Represents the IP ARP entry ageout time in seconds. The range is 15 to 21600
seconds.
no - This command configures the default ageout time for IP ARP entry.
Default Setting
The default value is 1200.
Command Mode
Global Config
6.1.2.7 arp access-list
Use this command to create an ARP ACL
Syntax
arp access-list <name>
no arp access-list <name>
no – Use this command to delete a configured ARP ACL.
Default Setting
None
Command Mode
Global Config
6.1.2.8 permit ip host mac host
Use this command to configure a rule for a valid IP address and MAC address combination used in ARP
packet validation.
Layer 2/3/4 Managed Switch
QuantaMesh | Routing Commands 651